D LINK AC750 DWR 953 User Manual

WIRELESS AC750 4G LTE MULTI-WAN  
ROUTER  
DWR-953  
QUICK  
INSTALLATION  
GUIDE  
INSTALLATIONSANLEITUNG  
GUIDE D’INSTALLATION  
GUÍA DE INSTALACIÓN  
GUIDA DI INSTALLAZIONE  
INSTALLATIEHANDLEIDING  
INSTRUKCJA INSTALACJI  
INSTALAČNÍ PŘÍRUČKA  
TELEPÍTÉSI SEGÉDLET  
INSTALLASJONSVEILEDNING  
INSTALLATIONSVEJLEDNING  
ASENNUSOPAS  
INSTALLATIONSGUIDE  
GUIA DE INSTALAÇÃO  
ΟΔΗΓΟΣ ΓΡΗΓΟΡΗΣ ΕΓΚΑΤΑΣΤΑΣΗΣ  
VODIČ ZA BRZU INSTALACIJU  
KRATKA NAVODILA ZA UPORABO  
GHID DE INSTALARE RAPIDĂ  
PRODUCT SETUP  
Ensure that your DWR-953 Wireless AC750 4G LTE Multi-WAN Router is powered off before  
performing the steps below.  
Step 1:  
Insert a standard USIM card into the SIM card slot on the back of the  
router with the gold contacts facing downward.  
Note: Do not attempt to insert a Nano SIM or Micro SIM into the SIM  
Router  
card slot.  
SIM card  
Step 2:  
Modem  
If you are connecting this router to a modem, insert one end of  
an Ethernet cable into the GE WAN port on the back of the router  
and the other end into your wired Internet connection device.  
Router  
Note: When connected to a modem, by default, the 4G connection  
will be used as a backup. The router will automatically use the 4G  
Internet connection if the wired connection is not available.  
PC  
Step 3:  
Modem  
Insert the supplied Ethernet cable into a LAN port on the back panel  
of the DWR-953, and an available Ethernet port on the network  
adapter in the computer you will use to configure the unit.  
Router  
PC  
Step 4:  
Modem  
Connect the power adapter to the power input on the back panel of  
your DWR-953 Wireless AC750 4G LTE Multi-WAN Router, and plug  
the other end of the power adapter into a wall outlet or power strip.  
The Status LED on the router will light up to indicate that power has  
been supplied to the router.  
Router  
Step 5:  
To configure the DWR-953  
Wireless AC750 4G LTE Multi-WAN Router:  
WELCOME TO THE D-LINK SETUP WIZARD  
Open a web browser window and enter 192.168.0.1 into the address  
bar.  
Enter admin for the username and leave the password area blank.  
The home configuration page will appear. Click Internet, located in  
the configuration panel, followed by Wizard to configure the DWR-953.  
3
DWR-953  
TROUBLESHOOTING  
SETUP AND CONFIGURATION PROBLEMS  
1. HOW DO I CONFIGURE MY DWR-953 ROUTER OR CHECK MY WIRELESS NETWORK NAME (SSID)  
AND WIRELESS ENCRYPTION KEY?  
• Connect your PC to the router using an Ethernet cable.  
• Open a web browser and enter the router's IP address: http://192.168.0.1  
• Log into the router using the default username admin; leave the password area blank.  
Once logged in, you can use the wizard located under Internet settings to configure the router,  
or make changes manually.  
Note: If you have changed the password and cannot remember it, you will need to reset the  
router to factory defaults.  
2. HOW DO I RESET MY DWR-953 ROUTER TO FACTORY DEFAULT SETTINGS?  
• If you cannot remember your router administrator password, you may use a paperclip to press  
and hold the reset button on the front of the router for about 10 seconds.  
Note: Resetting the router to factory default will erase the current configuration. To reconfigure  
your router, log in as outlined in question 1, then run the Setup Wizard.  
3. HOW DO I ADD A NEW WIRELESS DEVICE OR PC IF I HAVE FORGOTTEN MY WIRELESS  
NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY?  
• Every device that needs to connect to the router wirelessly will need use the correct Wireless  
Network Name (SSID) and encryption key.  
• Use the web-based user interface (as described in question 1 above) to check or choose your  
wireless settings.  
• Make sure you write down these settings so that you can enter them into each wirelessly-  
connected PC. You will find a dedicated area on the back of this document to note this important  
information down for future use.  
4. WHY AM I UNABLE TO ESTABLISH AN INTERNET CONNECTION?  
• If connecting using a 4G mobile connection, make sure that you are within range of the mobile  
service provider, and that the service has been correctly configured.  
• If connecting using the WAN via ADSL/Cable service, make sure the modem has been enabled/  
connected and is operational, and that the service is correctly configured.  
TECHNICAL SUPPORT  
dlink.com/support  
4
DWR-953  
NOTES  
5
DWR-953  
Ver. 1.00(EU)_130x183 2015/12/21  

Xerox 50 User Manual
Toshiba Estudio 60f User Manual
Sony Mx C400p User Manual
Sharp Ar 203e User Manual
Sanyo Cr1404gdzh8 User Manual
Samsung Aw24pk Series User Manual
Samsung Am27b1c13 User Manual
LG E2051S User Manual
LG 50UQ751C0SF User Manual
ACER B286HK User Manual