Fortinet Network Card FortiDB 400B User Manual

LED  
Power  
State  
Green  
Description  
The device is connected to a power source and on.  
QuickStart Guide  
FortiDB-400B  
Flashing Activity on the hard disk.  
Geen  
Hard Disk  
Alarm  
Red  
Hard disk failure.  
Green  
The correct cable is connected to the interface and  
the connected equipment has power.  
Ports 1 to 4 Right LED  
Ports 1 to4 Left LED  
Flashing Network activity at this interface.  
Green  
Amber  
Off  
The interface is connected at 1000 Mbps.  
The interface is connected at 100 Mbps.  
The interface is connected at 10 Mbps.  
USB  
400B  
CONSOLE  
1
2
3
4
Visit these links for more information and documentation for your Fortinet product.  
Technical Documentation - http://docs.forticare.com  
Fortinet Knowledge Center - http://kc.forticare.com  
Fortinet Technical Support - http://support.fortinet.com  
© Copyright 2009 Fortinet Incorporated. All rights reserved.  
Products mentioned in this document are trademarks or registered trademarks  
of their respective holders.  
Regulatory Compliance  
FCC Class A Part 15 CSA/CUS  
7 January 2009  
15-32000-86800-20090107  
Package Contents  
Connector  
Type  
Speed  
Protocol  
Description  
Copper gigabit connection to 10/100/1000 copper networks.  
Ports 1 to 4  
RJ-45  
10/100/1000  
Base-T  
Ethernet  
CONSOLE  
RJ-45  
USB  
9600 8/N/1  
RS-232 serial Optional connection to the management computer. Provides access to  
the command line interface (CLI).  
USB  
USB  
For future use.  
USB  
400B  
CONSOLE  
1
2
3
4
USB  
RJ-45 serial  
Removable hard disk  
Ethernet ports  
connection  
AC power  
connection  
QuickStart Guide  
Copyright 2009 Fortinet Inco
Trademarks  
RJ-45 to  
Straight-through  
Ethernet cable  
Rack-Mount  
Brackets  
Welcome  
|
Bienvenue | Willkommen |  
|
Bienvenido  
|
Benvenuto  
DB-9 Serial Cable  
Power Cable  
Connecting  
Connect the following to the FortiDB unit. Ensure the FortiDB unit is placed on a stable surface or install in a standard 19 inch rack.  
Insert one end of an Ethernet cable into port 1.  
USB  
400B  
CONSOLE  
1
2
3
4
Connect the other end of the Ethernet cable to the network hub or switch.  
RJ-45 to DB-9 serial cable  
connects to management  
computer  
Ethernet cables connect  
to computers on the  
internal network  
Connect the AC Power cable to the Power Supply on the back of the  
FortiDB unit.  
Connect the other end of the Power cable to a surge protected  
power bar or power supply.  
Power cable  
connects to  
power supply  
Configuration Tools  
Command Line Interface (CLI)  
Web-based manager  
The CLI is a full-featured management tool. Use it to configure the administrator password,  
the interface addresses, the default gateway address, and the DNS server addresses. To  
configure advanced settings, see the Tools and Documentation CD included with the  
FortiDB unit.  
The FortiDB web-based manager is an easy-to-use management tool.  
Use it to configure the administrator password, the interface and default gateway addresses,  
and configure reports.  
Requirements:  
Requirements:  
An Ethernet connection between the FortiDB unit and management computer.  
A web browser such as FireFox or Internet Explorer on the management computer.  
The RJ-45 to DB9 serial connection between the FortiDB unit and management  
computer.  
A terminal-emulation application such as HyperTerminal for Windows, on the  
management computer.  
 

Coleman Tent 2000002251 User Manual
Coleman Water Heater 15 000 BTU User Manual
Compaq Projector MP4800 User Manual
Craftsman Lawn Mower 37639 User Manual
Craftsman Snow Blower 53688113 User Manual
Crate Amplifiers Musical Instrument Amplifier GFX 1200H User Manual
Cuisinart Blender CB 18 User Manual
Dynex TV DVD Combo DX LTDVD19 09 User Manual
Fujitsu Air Conditioner ASU9RMLQ ASU12RMLQ AOU24RML AOU36RML User Manual
Garmin Fish Finder 200 User Manual